1.   Pусский
  2.   Español
  3.   Português
  4.   Türkçe
  5.   中文

Overview

The LEDs are used to show the MDVR working status. But when the MDVR is installed in the vehicle, it is not easy to check the LED on the front panel. Streamax develops this panel with 10 LEDs for easier MDVR working status checking. Any of the LED flash will indicate the corresponding status. Furthermore the panic button on the panel make it easier to trigger alarm for emergency.


Features

-Connect with MDVR for driver to check the MDVR working status easily
-The panic button to trigger alarm for emergency
-Compact size, light weight
-Easy to use




Product Series
LED Display Panel with Panic Button
LED indicator
VLoss 
ON means there is video loss
Rec 
ON means MDVR recording normally
GPS 
ON means GPS module detected
SD 
ON means SD card detected
2G/3G 
ON means wireless module (2G/3G) detected
Power 
ON means that MDVR get power, OFF means no power
ERR 
ON means HDD is full or any other hardware error
HIR 
ON means HDD is heating, OFF means not.
ALM 
Alarm signal triggered or not
HDD
ON means HDD detected, OFF means no HDD detected
Cable 
24AWG (American Wire Gauge)
Cable Length
150mm
Cable Diameter
3mm
Panel Material 
Metal
Voltage Input 
+5V

Copyright © 2014-2018 Streamax Technology Co., Ltd. All Rights Reserved.